The blog of cooking-ez.com
Fats for cooking
If you need to fry or sear anything a frying pan or saucepan, the temperature is likely to be high.
In particular, I have cooking red meat in mind. In this case, what should fat should we use? And at what temperature?
In particular, I have cooking red meat in mind. In this case, what should fat should we use? And at what temperature?
16K 13 5
Last modified on: January 23th 2018
Fats for cooking
For our red meat, let's imagine we want to fry a tournedos (let's go straight for something top-of-the-range). The same goes for this as for all other fried or seared red meat, and there's no secret: really, really hot; the meat should be seared or flash fried.
So much for the temperature, but what about the fat? For simplicity's sake, let's narrow this down to two possibilities: butter or oil.
Oil: No problem with this; the oil will take being heated to a high temperature. There's a trick to knowing when it is hot enough => it will begin to give off a light smoke. Look out for this and as soon as it happens, put your meat in the pan. Do be careful, though; you need to react quickly and not let it burn and smoke too much.
Butter: This presents more of a problem. Butter will not take high temperatures. To start with, it melts and foams, so we might go ahead and add the meat at that point. But as the temperature continues to rise, the butter will end up burning and give a very unpleasant, bitter flavour.
So, as you can see, if you want to cook at a very high temperature, it is better to use oil, as butter is unsuitable.
That's all very well, but oil doesn't taste the same as butter and doesn't give the same flavour to the meat; generally, butter makes it taste better (yes, taste also matters). So, is there really no way to fry meat in butter?
As it happens, there is – but not with normal butter. We need to use clarified butter, which is butter that has been separated off from the white milk solids, which you can see as the little bits in the photo above. These would end up burning and turning brown during frying. It is fairly simple to make and keeps very well.
There is a third way, using a mixture of the two: a little oil in the bottom and then butter added. This allows the temperature to be raised higher than for ordinary butter alone, but clarified butter is still the better option by far.
To sum up: When cooking red meat, always fry it at high temperature, and for the fat, use oil or clarified butter.
So much for the temperature, but what about the fat? For simplicity's sake, let's narrow this down to two possibilities: butter or oil.
Oil: No problem with this; the oil will take being heated to a high temperature. There's a trick to knowing when it is hot enough => it will begin to give off a light smoke. Look out for this and as soon as it happens, put your meat in the pan. Do be careful, though; you need to react quickly and not let it burn and smoke too much.
Butter: This presents more of a problem. Butter will not take high temperatures. To start with, it melts and foams, so we might go ahead and add the meat at that point. But as the temperature continues to rise, the butter will end up burning and give a very unpleasant, bitter flavour.
So, as you can see, if you want to cook at a very high temperature, it is better to use oil, as butter is unsuitable.
That's all very well, but oil doesn't taste the same as butter and doesn't give the same flavour to the meat; generally, butter makes it taste better (yes, taste also matters). So, is there really no way to fry meat in butter?
As it happens, there is – but not with normal butter. We need to use clarified butter, which is butter that has been separated off from the white milk solids, which you can see as the little bits in the photo above. These would end up burning and turning brown during frying. It is fairly simple to make and keeps very well.
There is a third way, using a mixture of the two: a little oil in the bottom and then butter added. This allows the temperature to be raised higher than for ordinary butter alone, but clarified butter is still the better option by far.
To sum up: When cooking red meat, always fry it at high temperature, and for the fat, use oil or clarified butter.
Lasts posts
Wipe meats and fish before cooking
When you want to cook meat or fish, there's a very simple yet very important step to take before you even start: It's to dry, or wipe, each side of the meat or fish, sometimes called "dabbing" or "sponging". But why? And how? Let me explain.5985 April 14th 2024
Toss the salad
When you've finished preparing a salad, green or otherwise, it's usually time to add the dressing and toss. It's often said to "toss the salad", which means to season and mix. Is it easy? Not so easy...2,3025 March 8th 2024
Half milk, half cream
In a multitude of recipes, savoury or sweet, milk is used as the main ingredient, or at least as the main liquid ingredient. Milk is used instead of water, for example, because milk contains a proportion of fat, which adds roundness and softness to the recipe. This mellowness is very pleasant on...2,240 February 27th 2024
Cutting soft cheeses
As you may have already noticed, when you have to use a "soft" cheese in a recipe - their exact name is "soft cheese" - such as Camembert, Munster or Mont d'or, it's not easy to make anything other than thick slices.2,3925 February 20th 2024
It's spinning too fast!
When you need to grate or slice vegetables, you generally use an electric machine that does all the work: a food processor, a mixer with a "slicer" extension or similar. Are these machines really suitable? Generally speaking, yes of course, but there's one criterion that often poses a problem,...5,2715 November 12th 2023
Other pages you may also like
How to choose a centrifugal juicer
A centrifugal juicer is an appliance designed to extract juice from all kinds of fruit and vegetables. It will produce juice from tomatoes, carrots, apples, pineapple, blackcurrants, etc. The idea is simple: the chosen fruit are fed into the top of the machine through a tube.The fruit should be...39K4.4 April 1st 2011
Choosing a chopping board
It's a no-brainer, surely? If you want a chopping board, just find a piece of wood, and Bob's your uncle! You can happily chop away with a knife and not damage the table or worktop. But in reality, it's a bit more complicated than that. You need to be careful what you are buying, in particular the...45K4.6 May 8th 2012
The perfect boiled egg
Making boiled eggs is always a delight and it pleases the young and old alike. This little transgenerational side puts them on the list of "things to do on Sunday evening when you don't know what to do" in many families (including mine)... That said, it's not that simple, you have to pay...12K4.7 January 30th 2021
From website to blog
Hello everyone, Today I'm inaugurating the cooking-ez.com "blog". The idea is to have a space for discussion open to everone, but not necessarily linked to a particular recipe or page. I hope the posts will be sufficiently interesting that you'll enjoy reading and discussing them. The...15K3.9 January 1st 2011
Maillard reactions
This subject cropped up recently in a discussion with my three charming nieces; do you know what Maillard reactions are? With a name like that, they could well be some principle in mechanics, but in fact the term applies to something much closer to all of us: it's what gives food more flavour...32K4 January 28th 2015
Follow this page (as 3 people already do)
If you are interested in this page, you can "follow" it, by entering your email address here. You will then receive a notification immediately each time the page is modified or a new comment is added. Please note that you will need to confirm this following.
Note: We'll never share your e-mail address with anyone else.
Alternatively: you can subscribe to the mailing list of cooling-ez.com , you will receive a e-mail for each new recipe published on the site.