Preparation |
---|
1 hour 20 min. |
1 | Prepare 300 g Fresh pasta dough, prefarably the day before, and leave in the fridge to rest for several hours or overnight, wrapped in plastic film. | |
2 | Cut the dough into lumps of about 3 ounces (75 grams) and roll out the first one with a rolling pin, roughly into a strip. Pass this strip through the pasta machine on its thickest setting ("1" if you have a Kenwood like mine). | |
3 | Pass through several more times, reducing the thickness each time by 1 setting, until the pasta is quite thin ("7" or "8* on the Kenwood). Note: as it gets thinner, the pasta strip will get longer. | |
4 | When the strip is the right thickness, lay on a lightly floured worktop and cut into 2 pieces to fit the size of your ravioli mould. | |
5 | Flour the ravioli mould generously. | |
6 | Lay a strip of pasta over the mould. This should overhang a little all round. | |
7 | Fill each hollow with your chosen filling mixture (here it is spinach and ricotta with pine nuts). | |
8 | Use a brush dipped in water to moisten the pasta all around the hollows to help the second sheet stick. | |
9 | Moisten the second sheet of pasta all over. | |
10 | Place the second sheet of pasta moistened side downwards on top of the mould. Press to seal the layers of pasta. | |
11 | Roll over the top with a rolling pin to cut the ravioli, first in one direction... | |
12 | ...then in the other. | |
13 | Peel away the pasta trimmings. | |
14 | Then take the ravioli out of the mould... | |
15 | ...and place on a wire rack. Remove any excess flour with a dry brush. Your ravioli are ready for cooking or freezing. | |
16 | Repeat the whole process with the remaining dough, adding in the trimmings from stage 13 of the first batch. | |
17 | At the end you will no doubt have a little dough left over. This need not go to waste: roll the dough out thinly and simply cut into tagliatelle with a knife. |