Burgers and cheeses
A quick look at burgers(article from 2 weeks ago), and in particular the cheese in burgers, many of you have asked me about this, and how to get cheese to melt in your burgers.
10 K 4.8/5 (16 reviews)
Keywords for this post:BurgersCheeseCookingChoiceLast modified on: April 24th 2021
Burgers and cheeses
It's true that cheese is a common ingredient in burgers, for the famous cheeseburger of course, but also as one of the ingredients, among others.
Either you want to have a dominant cheese taste (like a cheeseburger), or it's an ingredient that works well with many other ingredients.
The important thing is to use a good cheese, with a good taste, and if you want it to melt, to follow a little trick.
But to make a long story short, there are 3 really essential points:
1) Try to avoid, if possible, the so-called "hamburger cheese", fluorescent orange squares, soft and flat, in plastic, with an implausible composition for what is supposed to be cheese, and which contains actually very little cheese. It's tempting to buy it because it melts quickly, but it's not really top notch.
2) And then, go for real good cheese instead. Soft cheeses like Morbier, Saint-nectaire, Mozzarella, raclette, Camembert, or others, which you cut into thin slices as possible (yes, it's not easy), work by themselves.
Note however that other firmer cheeses are also possible, I'm thinking in particular of Comté (my favorite) or Cheddar, both old, cut into thin strips with a peeler or grated coarsely, they don't melt as much, but bring a rather top taste to the burger.
3) That's really the trick: When you're cooking the steaks on the second side, you've just flipped them over, put the cheese strips directly on top of the steaks in the pan/plancha while they're cooking, you can even cover the pan to make it easier to melt, or cover the burger with a bowl, and leave it on standby like that, in the warmth, before assembling your burger.
When ready to assemble, remove the steak + melted cheese with a spatula and place them on the bun before continuing with the other ingredients.
In summary: Real good cheese if possible, and put on the meat at the end of cooking still in the pan, possibly covered, to facilitate its melting.
Either you want to have a dominant cheese taste (like a cheeseburger), or it's an ingredient that works well with many other ingredients.
The important thing is to use a good cheese, with a good taste, and if you want it to melt, to follow a little trick.
But to make a long story short, there are 3 really essential points:
1) Try to avoid, if possible, the so-called "hamburger cheese", fluorescent orange squares, soft and flat, in plastic, with an implausible composition for what is supposed to be cheese, and which contains actually very little cheese. It's tempting to buy it because it melts quickly, but it's not really top notch.
2) And then, go for real good cheese instead. Soft cheeses like Morbier, Saint-nectaire, Mozzarella, raclette, Camembert, or others, which you cut into thin slices as possible (yes, it's not easy), work by themselves.
Note however that other firmer cheeses are also possible, I'm thinking in particular of Comté (my favorite) or Cheddar, both old, cut into thin strips with a peeler or grated coarsely, they don't melt as much, but bring a rather top taste to the burger.
3) That's really the trick: When you're cooking the steaks on the second side, you've just flipped them over, put the cheese strips directly on top of the steaks in the pan/plancha while they're cooking, you can even cover the pan to make it easier to melt, or cover the burger with a bowl, and leave it on standby like that, in the warmth, before assembling your burger.
When ready to assemble, remove the steak + melted cheese with a spatula and place them on the bun before continuing with the other ingredients.
In summary: Real good cheese if possible, and put on the meat at the end of cooking still in the pan, possibly covered, to facilitate its melting.
Lasts posts
A tablet holder
Perhaps you too cook by consulting your recipe on a tablet or phone, and putting it down on your worktop? It's practical, but not the best solution. Here's a look at how you can make an inexpensive, almost universal stand.March 14th 20261,2175
Pre-calibrated pastry dough
When making pie dough (shortbread, shortcrust, sweet...), it's always a good idea to make a lot at once, and then divide it into pieces, which you can freeze. I've already pointed out the mistake not to make, which is to form a ball before freezing. It's difficult to roll out afterwards because...March 9th 20261,1585
Butter vs. grease
We often read in a recipe where a pastry is put into a mould that, just before pouring, the mould should be buttered or greased. But what's the difference between these 2 terms?December 1st 20253,2125
Getting out of the fridge early
Very often when you're cooking, you need to take food or preparations out of the fridge, to use them in the recipe in progress. There's nothing tricky about this: you just take them out of the fridge and use them, usually immediately, in the recipe. But is this really a good method?November 24th 20252,1315
Who's making the croissants?
When you look at a bakery from the outside, you naturally think that in the bakery, the bakers make the bread, and in the laboratory, the pastry chefs make the cakes. It's very often like that, with each of these professions having quite different ways of working, but sometimes there's also one...November 23th 20251,949
Other pages you may also like
The window-pane test in bread-making
The home bread-makers often ask themselves “Have I kneaded my dough long enough?” . A good question, as dough that is insufficiently kneaded will not rise properly or will fall flat when the top is slashed, which is very frustrating. To know when the dough is ready, one can rely on the length...June 16th 202198 K 23.9
The cake and the raisins
When you bake a cake, like a cake or pound cake, you may have already encountered this thorny problem: How to make sure that the raisins, or the candied fruits, or any other small filling, do not fall to the bottom of the pan during the baking process?May 31th 201916 K4.7
The "caves" in the bakery and pastry shop
Maybe you've already done this? You want to make a brioche or a cake with fruit inside, you decide to proceed with your usual recipe, but also to add in the dough pieces of fresh and raw fruit, or whole fruit, for example pieces of apples or pears, good idea. When you bake it, everything seems to...March 27th 202113 K4.9
The so-called "nervous" meats
You've probably heard this before, we're talking about "nervous" meat, or meat with nerves, to describe what is indicated by the blue arrow on the left. This is a piece of beef, and what we call a nerve is not a nerve, it is in fact collagen (chemists sometimes call it a "collagen sink"), a...April 16th 202139 K4.5
In praise of slow cooking
You will no doubt have noticed that in cookery, it's often the actual cooking process that gets neglected. This is understandable; it comes at the end of the recipe and getting the dish in the oven is something of a relief (ah, that's done!), which frees us to cope with what's left: tidying the...February 9th 201143 K4.2
Post a comment or question
Follow this page
If you are interested in this page, you can "follow" it, by entering your email address here. You will then receive a notification immediately each time the page is modified or a new comment is added. Please note that you will need to confirm this following.
Note: We'll never share your e-mail address with anyone else.
Alternatively: you can subscribe to the mailing list of cooling-ez.com , you will receive a e-mail for each new recipe published on the site.